Logo

>> Alla böcker A-Z

Sortering

Tamiya 1/48

Bild

Artikelnummer: 61078

343:-

Skickas av oss inom 2 - 4 vardagar.

TAMIYA Gekko Type 11 Late Production

It was to be another long-range harassment of the Japanese outpost of Rabaul, New Britain Island. In the early hours of May 21, 1943, the B-17 Flying Fortresses of the 43d Bombardment Group moved inland, putting themselves in range of Japanese fighters. The gunners scanned the darkness of the night sky for enemy aircraft, but it seemed clear. Then, just before the bomb run could begin, enemy fire pierced the underbelly of the bomber and struck the engines, sending the B-17 crashing into the sea. The fatal shots came from the 20mm guns of fixed-angle, oblique-firing system mounted on a Japanese "Gekko" (Moonlight) night fighter, that the US would later name, "Irving". Its development goes back to 1938, when the Japanese Navy was planning a twin-engine fighter to support its long-range bombers. The aircraft was required to be capable of higher speeds and longer range than the "Zero", and equal to it in terms of maneuverability. The Nakajima Company brought forward a prototype, the 13-Shi Twin-engine Land-Based Fighter (J1N1), which used two 1000hp "Sakae" engines, one on each of its sturdy main wings. Since it proved inferior to single-engine fighters of the time, it was adopted as a Type 2 Land-based Reconnaissance Aircraft (J1N1-R). However, the need to counter the nocturnal B-17 bombers in the Southwest Pacific led to its conversion into a night-fighter. This transformation came about by positioning the armaments to fire at an oblique angle from the line of flight, allowing the fighters to swiftly strike the bombers while maintaining a parallel course and speed with a target either above or below.

 

1/48 scale recreation is ideal to appreciate the delicate curvatures and subtle detailing of this legendary IJN aircraft. Oblique guns and ammunition cases recreated with stunning accuracy. Gun inspection hatch can be modeled in the open or closed position. Model comes with markings for two aircraft and two finely sculpted figures.


The Type 99 20mm No. 2 Fixed Machine Guns were mounted obliquely on the Gekko. These fearsome weapons could be loaded with about 100 bullets each (but usually, only 90 were loaded due the rigidity of the springs). Two of these guns were mounted on the upper fuselage and two on the lower fuselage for a total of four. However, there were some aircraft with three guns on top but without the lower guns.

Bild

Artikelnummer: 35234

218:-

Skickas av oss inom 2 - 4 vardagar.

TAMIYA M20 Armored Utility Car

A derivative of the U.S. M8 Light Armored Car Greyhound, the U.S. M20 Armored Utility Car rolled onto the battlefield in 1943. The rotating turret of the M8 was removed, allowing space for passenger seats, a commanders table, radio sets and a ring mounted M2 heavy machine gun. The M20 was mainly deployed to the Tank Destroyer Unit, where its top speed of about 90km/h was taken advantage of in command, cargo, and reconnaissance duties.

 

 

This plastic assembly model kit is based on the U.S. M20 Armored Utility Car. The low body with an open-top has been richly recreated in 1/35th scale. The passenger seats, folding commander"s table, and radio sets all overflow with authenticity. Kit also features a bazooka, ammunition cartridges, ring mounted M2 heavy machine gun and other detailed accessories. Two lifelike figures for the commander and driver are also included
 

Bild

Artikelnummer: 32559

218:-

Skickas av oss inom 2 - 4 vardagar.

TAMIYA 1/48 U.S. STAFF CAR 1942

During WWII, the U.S. Military used various makes of civilian cars as military staff cars. At this
time, the U.S. Military mostly used the 1942 sedan for this purpose. This 4.9m long sedan was
powered by a 90hp, 6-cylinder 3700cc motor. This sedan was widely used as a Staff Car for
high-ranking officers and as transport for aviators.
Data for the modeling the U.S. Army Staff Car was taken from an actual vehicle at the Minnesota
Aviation Museum. From the large compilation of photos, the shape of the vehicle was accurately reproduced. The chassis is made of die-cast metal which adds to the model"s feeling of weight. A new driver figure comes supplied with the model. You are able to add this Staff Car with other 1/48 Military Miniature Series figures and
vehicles such as the M4 Sherman tank and the M26 Pershing tank for diorama creation. Also, by combining the Staff Car with fighter planes such as the P-51D and P-47 you can
really assemble an exciting airfield diorama

Bild

Artikelnummer: 89732

405:-

Skickas av oss inom 2 - 4 vardagar.

TAMIYA 1/48 P-51D & U.S.STAFF CAR

Tamiya"s 1/48 scale North American P-51D Mustang is widely considered by aviation model enthusiasts as the most accurate and well-engineered scale model kit of this aircraft. This critically acclaimed aircraft kit has now been packaged together with a new 1/48 scale Military Miniature Staff Car to add another element to the models display possibilities.

When the U.S. formally entered WWII in 1941, its automobile industry was called upon by President Roosevelt to become the "Arsenal of Democracy." Detroit responded by halting new car development and changing its assembly lines to churn out tanks, planes, and other war equipment. The 4-door sedan selected for use as a military staff car was the last new car model available
until the end of hostilities in 1945. It featured distinctive "suicide" rear doors, V8 engine, and had a fuel-fired heater in the passenger compartment.

Combination set containing 1/48 scale assembly kit models of the North American P-51D Mustang and staff car.
Existing P-51D kit (ITEM 61089) parts used, with brand new sprues included for pilot figure and fuel tanks, as well as 3 types of new markings.
The staff car is the first of its kind in this scale, and the new moldings accurately reproduce its rounded body and distinctive bulbous fenders.
Staff car also features die-cast chassis to give it an additional sense of volume.

 

 

Bild

Artikelnummer: 61111

873:-

Skickas av oss inom 2 - 4 vardagar.

TAMIYA 1/48 DAMBUSTER/GRAND SLAM

This aircraft also known as the "Grand Slam Bomber", was powered by four Rolls Royce Merlin engines, and was used by the English Royal Air Force in bombing raids against Germany. Approximately 7,377 units were built. The Avro Lancaster B Mk.I/III specifications are as follows: Length: 21.18m, Width: 31.10m, Weight: 33.11t, Power source: Four Rolls Royce Merlin engines (1480-1640hp) The Tamiya model assembly kit faithfully captures this piece of WWII aircraft history.

 

Bild

Artikelnummer: 4950344897872

458:-

Skickas omgående

Tamiya 1/48 REGGIANE RE2002

 

Bild

Artikelnummer: 4950344611133

538:-

Skickas omgående

Tamiya 1/48 IL-2

Bild

Artikelnummer: 89784

488:-

Skickas av oss inom 8 - 12 vardagar.

Tamiya 1/48 HAWK MK.66 SWISS AIR FORCE

 

Bild

Artikelnummer: 25158

613:-

Skickas av oss inom 8 - 12 vardagar.

Tamiya 1/48 FI156C FOREIGN AF

Bild

Artikelnummer: 61114

788:-

Skickas av oss inom 8 - 12 vardagar.

Tamiya 1/48 GRUMMAN F-14A TOMCAT

 

 

Bild

Artikelnummer: 61118

874:-

Skickas av oss inom 8 - 12 vardagar.

Tamiya 1/48 GRUMMAN F-14D TOMCAT

1/48 Grumman F-14D Tomcat

Following on from our successful 1/48 model of the F-14A in 2016, Tamiya is delighted to announce a new Tomcat in the 1/48 Aircraft Series: the F-14D, an updated version of the aircraft that served until the Tomcat was withdrawn from Navy service in 2006.

It featured an improved engine in the shape of the General Electric F110, and the aircraft’s transition from the earlier carrier-based fighter models to the F-14D multi-role aircraft was facilitated by digital updates to radar and fire control systems.

Some F-14Ds were newly-constructed, while conversions from F-14As also existed. Take this chance to add a multi-role legend to your collection of 1/48 scale aircraft models!

About the Model
• This is a 1/48 scale plastic model assembly kit. Fuselage length: 398mm, wingspan: 408mm (with variable sweep wing in fully forward position).
• Tamiya designers spent many hours close up with real aircraft to obtain a highly accurate end product.
• Captures F-14D-specific features such as the engine afterburner nozzles, vertical stabilizers and even minute panel lines.
• A detailed cockpit includes depictions of updated instrument panels and ejection seats.
• Model parts depict late variants of Phoenix, Sparrow and Sidewinder air-to-air missiles. Also included are parts for drop tank, laser- and GPS-guided bombs, LANTIRN targeting pod, TARPS reconnaissance pod and jamming pod – a comprehensive line-up.
• Features moving depiction of variable sweep wing. 2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions.
• Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections.
• Poly caps allow movement of horizontal stabilizers.
• Comes with realistic figures depicting pilot and RIO (Radar Intercept Officer) in seated pose.
• Includes high-quality decals to realize 4 (planned) marking options, plus a handy set of masking stickers for use when painting the canopy.

Bild

Artikelnummer: 4950344126200

95:- -5% (100:-)

Skickas omgående

1/48 Landing Gear Display Set

OBS ENDAST DISPLAY STAND, INGET FLYGPLAN INGÅR  
Combined with the 1/48 Fi156C Storch, this set can easily reproduce the scene of flying as well as other situations such as landing. Includes bended landing gear struts, landing gear covers with extended shock absorbers, lower fuselage support, display base and metal shaft. You can freely change the form of the display as well as using it as a desktop model. Also adding other 1/48MM models with the Fi156C

 

Bild

Artikelnummer: 4950344325351

254:- -5% (268:-)

Skickas omgående

TAMIYA 32535 Russian KV-1 - 1/48

 

Scale 1/48

 

 

Suggested Paint Colors TS-2 - Dark Green X-10 - Gun Metal X-11 - Chrome Silver XF-1 - Flat Black XF-2 - Flat White XF-56 - Metallic Grey XF-61 - Dark Green

Bild

Artikelnummer: 4950344992928

356:- -5% (375:-)

Skickas omgående

TAMIYA 61046 F4U-1/2 Bird Cage Corsair - Chance Vought

 

Scale 1/48

Längd 236mm, spännvidd 205mm

 

Suggested Paint Colors AS-19 - Intermediate Blue (USN) AS-20 - Insignia White (USN) AS-8 - Navy Blue (US NAVY) X-10 - Gun Metal X-11 - Chrome Silver X-4 - Blue X-7 - Red
 

Bild

Artikelnummer: 4950344610839

439:- -5% (463:-)

Skickas omgående

TAMIYA 61083 Gloster Meteor F.3

 

Scale 1/48

Längd 261mm Spännvidd 273mm.

 

Suggested Paint Colors AS-10 - Ocean Gray (RAF) AS-11 - Medium Sea Gray (RAF) AS-9 - Dark Green (RAF) TS-27 - Matte White X-11 - Chrome Silver X-18 - Semi Gloss Black X-4 - Blue

Bild

Artikelnummer: 4950344995905

321:- -5% (338:-)

Skickas omgående

TAMIYA 61053  Bristol Beaufighter VI

 

Scale 1/48

Längd 270mm spännvidd 370mm

 

Bild

Artikelnummer: 4950344961726

517:- -5% (544:-)

Skickas omgående

TAMIYA 61073M Douglas A-1J Skyraider USAF

 

Scale 1/48

Längd 248mm spännvidd 317mm

 

 

Bild

Artikelnummer: 4950344200665

517:- -5% (544:-)

Skickas omgående

TAMIYA 20066 Porsche 928S

 

Scale 1/20

 

ingår i serien "80s Tamiya master models"

 

Suggested Paint Colors TS-46 - Light Sand TS-75 - Champagne X-11 - Chrome Silver X-18 - Semi Gloss Black X-26 - Clear Orange X-27 - Clear Red X-6 - Orange
 

Bild

Artikelnummer: 4950344611126

874:-

Skickas av oss inom 2 - 4 vardagar.

TAMIYA 61112 Avro Lancaster B Mk.I/III

 

Scale 1/48

 

Längd 443mm spännvidd 648mm

 

Inklusive 5 figurer

4 olika dekalvarianter

 

Färger

X-11, XF-1, XF-2, XF-3, XF-5, XF-15, XF-16, XF21, XF-50, XF-52, XF-55, XF-56, XF-62, XF-63, XF-64, XF-65

 

 

Bild

Artikelnummer: 4950344611102

663:-

Skickas omgående

TAMIYA 61110 Mitsubishi G4M1 Model 11 - Admiral Yamamoto Transport

 

Scale 1/48

 

LÄNGD 518mm SPÄNNVIDD 416mm 

 

 

  Suggested Paint Colors AS-1 - Dark Green (IJN) AS-12 - Bare Metal Silver X-10 - Gun Metal X-11 - Chrome Silver X-12 - Gold Leaf X-18 - Semi Gloss Black
 

Bild

Artikelnummer: 4950344325450

223:- -5% (235:-)

Skickas omgående

Russian KV-1B w/Applique Armor

Tamiya 32545, Scale 1/48

 

Suggested Paint Colors

 

TS-2 - Dark Green

X-10 - Gun Metal

X-11 - Chrome Silver

XF-1 - Flat Black

XF-2 - Flat White

XF-56 - Metallic Grey

XF-61 - Dark Green

XF-64 - Red Brown

 

Tamiya announces the release of the up-armored KV-1B in our ever-growing 1/48 MM Series. Display it with the previously released KV-1 to show the differences between the two, line it up with our other Russian vehicles like the T-34 and GAZ-67B, or pit it against its German adversaries like the Tiger I and Panther in battle dioramas.

 

About the KV-1B

Armed with a powerful 76.2mm main gun and equipped with 75mm frontal armor, the KV-1 tank was an unpleasant surprise for the German army when they invaded Russia in the summer of 1941. Impervious to nearly all anti-tank guns, the KV-1 proved to be a formidable opponent, but the introduction of newer, more powerful German tanks lessened its advantage as the war went on. In response, additional armor plates were bolted onto the hull and turret to increase protection, resulting in the KV-1B variant.

 

About the Model

- High quality 1/48 scale assembly model kit of the KV-1B heavy tank.

- Diecast chassis for added weight and realism.

- Applique armor for turret and hull accurately reproduced complete with bolt details.

- Turret hatch can be modeled in both opened and closed positions.

- Tank treads are assembly type, with the upper section featuring realistic sag effect.

- 3 types of markings included (tentative).

 

Bild

Artikelnummer: 4950344370078

151:- -5% (159:-)

Skickas omgående

Macci MC.200 Saetta

Tamiya 37007, Scale 1:48

 

Suggested Paint Colors

 

X-10 - Gun Metal

X-11 - Chrome Silver

X-18 - Semi Gloss Black

X-5 - Green

X-7 - Red

XF-1 - Flat Black

XF-10 - Flat Brown

XF-15 - Flat Flesh

XF-16 - Flat Aluminum

XF-2 - Flat White

XF-20 - Medium Grey

XF-21 - Sky

XF-28 - Dark Copper

XF-3 - Flat Yellow

XF-49 - Khaki

XF-5 - Flat Green

XF-52 - Flat Earth

XF-59 - Desert Yellow

XF-64 - Red Brown

XF-66 - Light Grey

XF-67 - NATO Green

 

Specifications & Features

- 1/48 plastic assembly model kit.

- The form of the Macchi MC.200 including distinctive features such as the engine cowling with teardrop bulges has been faithfully reproduced.

- Cockpit interior and engine feature fine details.

- Flaps can be assembled in either up or down positions.

- Canopy can be assembled in either open or closed positions.

- Two pilot figures included-Aircraft parts are made by Italeri. Figures are made by Tamiya.

 

Bild

Artikelnummer: 4950344325443

134:- -5% (141:-)

Skickas omgående

German Flakpanzer IV Wirbelwind

Tamiya 32544, Scale 1:48

 

Suggested Paint Colors

 

TS-1 - Red Brown

TS-2 - Dark Green

TS-3 - Dark Yellow

X-10 - Gun Metal

XF-1 - Flat Black

XF-10 - Flat Brown

XF-15 - Flat Flesh

XF-2 - Flat White

XF-24 - Dark Grey

XF-56 - Metallic Grey

XF-60 - Dark Yellow

XF-61 - Dark Green

XF-64 - Red Brown

XF-65 - Field Grey

 

One of the main attractions of Tamiya's 1/48 Military Minature Series is how easily the kits can be integrated into dioramas, especially ones that involve aircraft of the same scale. With the addition of the Flakpanzer IV Wirbelwind, Tamiya gives modelers yet another interesting subject for such projects.

 

About the Flakpanzer IV Wirbelwind.

As the Luftwaffe lost air superiority, Allied fighter-bombers proved to be an increasingly dangerous threat to the German army, and plans were developed to produce a purpose-built mobile antiaircraft platform to protect the ground units from air attack. The Wirbelwind was based on the proven Pz.kpfw.IV chassis and featured a uniquely-shaped open turret with 9 side panels. Armed with quadruple 20mm Flak 38 L/112.5 fast-firing cannons, it was able to make life difficult for low-flying Allied planes that got in its range as well as provide direct fire support for ground troops. Due to material shortages, production was hampered and there were never enough of these vehicles to go around.

 

About the Model

- High quality 1/48 scale assembly model kit of the Flakpanzer IV Wirbelwind.

- Distinctively-shaped open turret accurately reproduced with interior details.

- Quad 20mm guns with gun sight can be elevated to various angles, allowing for more diorama options.

- Diecast chassis for added weight and realism.

- Tank treads are assembly type, with the upper section featuring realistic sag effect.

- 4 figures and two types of markings included.

 

 

Tom kundvagn

Summa totalt:

0 kr