Tamiya RC Bilar 1/10

TAMIYA 23651 Färdig proffsbyggd RC TOYOTA HILUX

Färdig modell proffsbggd av TAMIYA inklusive radio.

Levereras utan batterier.

1/10 RC RTR Toyota Hilux High-Lift 4x4 4WD Full Set Finish

Tamiya 58471

Skala 1/10

Compact Sports Race Car 】　From the late 1960s to the early 1970s, the Alpine A110 became famous for its exploits on the rally scene. This popular French, lightweight, compact sports car now comes reproduced as a 1/10 scale R/C model. The polycarbonate body realistically reproduces the flowing lines of the Alpine and parts such as the metal plated front and rear bumper, front bumper light pods, side mirrors etc. are made with separately molded parts which provides the model with a greater realistic scale finish. The M-05Ra chassis will allow you to enjoy driving on both on-road and flat-dirt surfaces.

【 Rally Ready M05Ra Chassis 】　Based on the front wheel drive M-05 chassis, the rally-tuned M-05Ra chassis features a lightweight, narrow, durable, and an easy-assembly semi-monocoque resin frame. The 4-wheel independent double wishbone suspension is equipped with specially designed hub carriers and F/R uprights to increase ground clearance by 5mm. The front skid guard, side guards, and rally block tires are also included to allow you to enjoy both gravel and tarmac driving.

【 Specifications 】　●Length: 395mm ●Width: 168mm ●Height: 118mm ●Wheelbase: 210mm ●Weight: 970g ●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 26/60mm ●Monocoque Frame Chassis ●Front Wheel Drive ●3-Bevel Differential Gear ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio＝7.25：1 ●Type RS540 Motor Included ●Requires Electronic Speed Controller (ESC)

- Längd 395mm

- 1/10 R/C assembly model kit.

- Polycarbonate body, includes separately molded light cases.

- Side mirrors separately molded.

- Polycarbonate guards protect the motor and battery pack against dirt and debris.

- Short wheelbase: 210mm.

- 60D rally block tires included.

Tamiya 58470

The Holiday Buggy now comes mounted on the DT-02 chassis which has its battery pack loaded in the center of the bathtub frame and has excellent handling performance even on rough surfaces.

- 1/10 R/C assembly kit of the special edition Holiday Buggy.

- Features ribbed front and spike rear tires as the original.

- Newly designed full-body sticker sheet included.

- Blue colored durable polyethylene (PE) body included.

- Comes mounted on the 2WD DT-02 chassis.

- Pre-painted driver figure included.

- Length: 390mm

- Width: 240mm

- Height: 164mm

- Wheelbase: 260mm

- Ground Clearance: 26mm

- Weight: 1250g

- Type 380 Motor Included

- Rear Wheel Drive 2WD

- Tire Width/Diameter: F=22/81mm R=39/86mm

- Tread: F/R=217mm/208mm

- 3-Bevel Differential Gea

- 2-Piece Steering Tie-Rod

- F/R Double Wishbone Suspension

- Gear Ratio=15.77:1

Tamiya 58463

Skala: 1/10

Chassis längd: 384 mm

Total bredd: 185 mm

Hjulbas: 257, 245, 233 mm

FF-03 PRO Chassis Kit inkluderar följande delar:

- Tamiya 42102 TRF Special Damper (Hard Black Coating) plus Titanium Coated Piston Rods and White Coil Springs (Medium x2, Hard x2)

- Tamiya 51000 Hi-Torque Servo Saver (Black)

- Tamiya 53159 4 mm Anodized Aluminum Flange Lock Nuts (Blue)

- Tamiya 53642 5 mm Aluminum Ball Connector (Blue)

- Tamiya 54121 Aluminum Horn For Hi-Torque Servo Saver

- Tamiya 54223 FF-03 Aluminum Motor Plate (Blue)

- Aluminum Turnbuckle Shafts (Blue)

- 5mm Adjuster (Gray)

Expert byggd av TAMIYA

LED strålkastare

Tamiya 57799

 Radiostyrning ingår.

Laddare och batteri beställs separat.

This vehicle is built on the TT-01 Type E chassis and is a R/C model of Rahal Letterman's BMW M3 GT2, which was raced at the 2009 American Le Mans Series.

- 1/10 scale R/C assembly model kit of the BMW M3 GT2 2009.

Detailed polycarbonate body accurately captures the powerful form of the BMW M3 GT2.

- Side mirrors, rear wing, and metal plated light cases are precisely reproduced.

- Shaft driven 4-wheel drive TT-01 Type-E chassis.

- Accurately reproduced wheels and tires with tread pattern are included.

- Each front light case has one 5mm and one 3mm LED Light installation points.

- Each rear light case has one 5mm and two 3mm LED Light installation points.

- Comes with LED Light Unit TLU-01 (Item 53909) and 2 white and 2 red 5mm LED lights (Total 4) are included.

- TEU-104BK ESC and type 540 motor included.

- 2-channel R/C system.

Tamiya 58405

Tamiya 58374

Specifikationer

Längd: 384 mm

Bredd: 248 mm

Höjd: 140 mm

Vikt: 1 042 g

Introducing Tamiya's newest release on the DT-02 chassis, Sand-Viper! This 1/10 scale 2WD assembly off-road buggy continues in the vein of our successful Desert Gator buggy, but will feature an all-new body and wing shape, together with dish type wheels. Versatile and reliable DT-02 chassis features transverse mounted Type RS540 motor and 4-wheel double wishbone suspension. Full ball bearings ensure maximum efficiency and a long-life of dirt tearing action!

- High performance 2WD off road buggy assembly kit.

- 4-wheel independent double wishbone suspension with oil dampers secures stable running.

- Suspension upper arms use double-ended shafts, enabling fully adjustable camber angle.

- TEU-101BK electronic speed control included with kit.

- Type 540 motor.

- Differential gear gearbox is fully sealed from dirt and stones, ensuring a long life of smooth handling.

- Drive shaft features joint cup made of highly durable metal.

- Full ball bearing configuration offers maximum engine efficiency.

- Features wide grooved front tires and spiked rear tires for excellent off-road ability.

- Newly designed body and wing shape

- Wheels are racey off-road dish type

- Length: 384mm

- Width: 248mm

- Height: 140mm

- Wheelbase: 260mm

- Lowest Ground Clearance: 26mm

- Weight: 1042g

- Motor: Type 540

- Drivetrain: Rear Wheel Drive

- Tread: (Front & Rear) 216mm/208mm

- Diff. Gear: 3-bevel diff.

- Steering Tie Rod: 2-piece

- Suspension: 4-wheel Double Wishbone

- Gear Ratio: 9.28:1

- Separately Required 2-Channel R/C System with ESC 7.2V Racing Battery & Charger

Tamiya 58344

Inklusive elektronisk fartkontroll

 Skala 1/10

Längd: 384 mm

Bredd: 248 mm

Höjd: 137 mm

Vikt: 1 142 g

Basic Specifications

- Wheelbase: 260mm, ground clearance: 26mm

- 540 Type electric motor

- Transmission Type: Rear 2 Wheel Drive Diff. gear system: 3 bevel diff, gear ratio: 9.28:1

- Tread: 216mm (front), 208mm (rear)

- Steering Tie Rod: 2 part

- Suspension: double wishbone (front & rear)