Logo

>> Alla böcker A-Z

Sortering

Elektrisk Offroad 1:10

Bild

Artikelnummer: 4950344065363

2035:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Hotshot (2007)

An R/C Legend Returns
With its aggressive-looking body design and low center of gravity, the Hotshot, Tamiya's first shaft-driven 4WD R/C buggy, made waves when it was introduced in 1985. The unique 3-piece chassis included such innovative features as front/rear mono-shock oil dampers, 4-wheel double wishbone suspension equipped with stabilizers, and front/rear fully-enclosed gearboxes equipped with thrust ball bearings and differential gears. A wide array of Option Parts were produced especially for modifying the Hotshot, and the machine became something that every youth at that time dreamed of. Fans have clamored for a re-release of the epoch-making R/C car, and Tamiya now brings back this legend to let fans relive their childhood memories.

An Old Dog with New Tricks
Tamiya designers have given the Hotshot a makeover, replacing older, harder to assemble parts with modern equivalents but still keeping true to the spirit of the original Hotshot. While the front/rear double wishbone suspensions and adjustable mono-shock oil dampers remain the same, the drivetrain features modern dog bone type propeller shafts for enhanced reliability. The oil dampers have also been changed to the more modern diaphragm type. Also, with the use of a modern ESC, the original Hotshot's rear aluminum heat sink was no longer necessary. However, the Hotshot would not look the same without it, so our solution was to install a dummy part to remain faithful to the original look. Take this updated Hotshot out for a spin and compare it to today's R/C buggies to experience how far this hobby has developed!

 

Specifications

Length: 390mm; Width: 235mm; Height: 150mm; Weight: 1270g Tread: (Front/Rear) 194mm Tire Width/Diameter: (Front) 28/82mm, (Rear) 34/82mm Frame: ABS Resin Monocoque Drivetrain: Shaft-driven 4WD Diff. Gear: 3-bevel Steering: 2-piece Tie Rod Suspension: 4-wheel Double Wishbone Gear Ratio: 8.1:1, 10.04:1 Motor: Type RS540

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344065318

884:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C The Grasshopper

Let It All Begin With This One Buggy
Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as oil dampers, 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please.

Simple But Tough 2WD Chassis
The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable plastic body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough handling. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip performance on dirt tracks. Half-body driver figure adds that finishing touch to a fun off-road R/C car

Basic Specifications

Length: 389mm, width: 223mm, height: 135mm, weight: 830g 380 type motor (chassis compatible with 540 type motor - sold separately) Transmission Type: Rear 2 Wheel Drive Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers Sealed rear gearbox to protect diff gear during off-road running 3-piece assembly wheel, straight ribbed racing front tires, paddle rear tires Front and rear axle compatible with ball bearings (sold separately)
 

Bild

Artikelnummer: 5050864025836

2151:-

Skickas av oss inom 8 - 12 vardagar.

Quantum MT Flux 1/10 4WD Stadium Truck - Silver

The Maverick Quantum MT FLUX is a rugged 4WD Shaft-Driven, monster truck with a high ground clearance chassis design and high ride height suspension set up for clambering over anything in its way!  With independent Double Wishbone Suspension, Oil Filled Adjustable Coilover Shocks and Tough Metal 4-Gear Differentials Front & Rear, no amount of dirt or jumps will stand in your way!

Pushing the boundries of quality and performance and reaching heights never before seen with Maverick brand, the whole range of Quantum kits benefit from a new Molded Tub Chassis with Hex Pattern Reinforcement, oversized 2.8" wheel design and an adjustable wheelie bar fitted as standard.

In fact, where power is concerned, the Maverick Quantum line-up is the first to be fitted with HPI Racings own World famous FLUX branded brushless system - So you get a 3300KV Brushless Motor in the Quantum MT FLUX, capable of taking a thrilling 3S of LiPo power! And don't worry, to help you deal with all that power, we've beefed the truck up with front universal driveshafts and aluminum hex hubs!

 

UNLEASH THE BEAST FOR SOME CRAZY, STUNNING ACTION!

The Quantum MT FLUX comes preloaded with the MM-3660-BL 3300KV Brushless Motor complete with 5.0mm Shaft powering a tough shaft drivetrain spinning all 4 wheels for awesome 4WD action. While the waterproof MSC-30BL-WP ESC and water-resistant servo and gear cover mean the fun keeps coming and water or debris won't stand in your way!

 

REAL STEERING WHEEL CONTROLLER INCLUDED!

Anyone who has used a Maverick RC vehicle before will tell you that the MTX-244 transmitter makes for a fantastic driving experience with great throttle and steering response. When it comes to the Maverick 2.4GHz radio system we cut no corners on quality or feel.

All you need is 4 x AA batteries for the transmitter and a LiPo battery of your choice, upto 3S! Check below for more information.

 

IT'S SO EASY AND FUN TO DRIVE!

To drive the Quantum MT FLUX, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - then release and push away again to go into reverse. It takes seconds to get used to this easy operation, and pretty soon you'll be racing with your friends!

 

INTRODUCING TREDZ TIRES BY HPI RACING

We're proud to announce the fantastic  Quantum range features the first two tires in our new TREDZ range. Fully bespoke with compound, profile and tread patterns that are designed and specified by HPI Racing. Wrapped in high quality, high grip rubber.

Tredz Tires by HPI Racing are also available to purchase to upgrade the look and performance of any RC vehicle with 12mm Hex Hub wheel fittings. Look out for more tires joining the Tredz family soon!

 

ADJUSTABLE WHEELY BAR AS STANDARD!!

When it comes to stunts, jumps and speedruns we've thought of everything with the Quantum family of vehicles. For the first time under the Maverick brand we've pre-installed this sturdy, adjustable wheely bar across the Quantum range. Now you can bust out the longest wheelies on command! Simply pull the trigger and watch it go!

 

SUPERIOR SUSPENSION FOR SUPERB HANDLING

Featuring independent double wishbone suspension front and rear, oil filled coilover shocks, pillow ball suspension uprights on all four corners and adjustable steel turnbuckle links, you can drive in any terrain with confidence and complete control.

Bild

Artikelnummer: 4950344587070

2951:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C XV-02 PRO Chassis Kit 

Tamiya is proud to announce this shaft-driven 4WD chassis kit for rally cars, an addition to the XV chassis series that will be a popular addition to the R/C rally series.


About the Model
• This is a 1/10 scale R/C chassis assembly kit.
• Equipped with front mid-ship motor plus front and rear long propeller shafts of the some length.
• Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive balance.
• Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice-versa for drive balance bias to rear.
• Features newly-designed parts such as gears, bathtub frame chassis, chassis cover, caster blocks featuring the 6-degree caster angle (XV-01 chassis: 10-degree caster angle), and bumpers with skid angles to reduce surface contact.
• Includes an aluminum servo mount.
• The motor mount, propeller shafts, input and center shafts, and urethane bumpers have new metal parts.
• It features a longitudinal battery pack position in the center-left for optimum balance.
• Long aluminum dampers are employed at front and rear.
• A polycarbonate chassis cover with wheel well liners helps prevent dirt and dust from getting inside.
• Suspension arms and front uprights are based upon the XV-01 chassis kit.
• Rally dish white wheels are paired with rally block tires.
• Please note, the XV-02 PRO Chassis Kit, does not include motor, please use a recommended Tamiya motor.

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344066209

2496:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Ford Bronco 2021 (CC-02)

Tamiya is proud to announce the release of the Ford Bronco 2021 as our new R/C model on the cross country CC-02 chassis.

The Ford Bronco has been sold since 1966, and the Ford Bronco 2021 was announced as the sixth generation model in 2021, 25 years since the last generation’s release. This car employs 2.3-liter inline-4 engine (standard) or 2.7-liter V6 engine (option). The model depicts the 2-door type’s top grade First Edition model.


About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 447mm, width: 204mm, height: 233mm (tentative). Wheelbase: 252mm (*1).
• The lightweight, durable 1.2mm thick polycarbonate body realistically captures the distinctive form with round front lights, raised lines on front fenders, and oblong taillights in style.
• Features PC-ABS H parts (grille, mirrors, spare tire cover and door handles) and metal-plated K parts (light cases).
• The PC-ABS roof rack part is included as a standard part to give the model a powerful cross country image.
• The CC-02 chassis has ladder frame which was inspired by full-size vehicles, provides both rigidity and cool styling, and allows stable performance even on tricky rocky and dirt roads. (*1: The use of M-size wheelbase with the CC-02 chassis is the first time.)
• 12-spoke black wheels (width: 26mm, offset: +6) (*2) are paired with semi-pneumatic rubber tires.

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344066193

3156:-

Tillfälligt slut (Obekräftad leveranstid)

1/12 R/C Toyota Land Cruiser 40 Pick-Up Quadtrack (GF-01FT)

Toyota’s Land Cruiser is one of the most recognizable 4WD vehicles in the world, especially the 40, a series which was sold from 1960 to 1984. Now, Tamiya is delighted to announce a new addition – an R/C model featuring the combination of the "square" layout 4WD GF-01FT chassis and track units – to our R/C line up!


About the Model
• This is a 1/12 scale R/C model assembly kit. Length: 337mm, width: 250mm, height: 236mm. Wheelbase:174mm.
• This model recreates the Land Cruiser 40 Pick-Up equipped with 3-sided track units in place of tires.
• These track units offer superlative traction compared to tires but also enable the model to run even on snow, sand, mud and other testing conditions with stable grip.
• The model is based upon the gear-driven 4WD GF-01FT chassis featuring a monocoque frame with power
provided by the centrally-positioned motor via front/rear differential gears.
• "Square" layout with similar wheelbase and tread measurements provides unique performance.
• Choose between two types of track links; standard flat designs, and toothed grouser designs.
• A lightweight, polycarbonate body, and driver figure are also included.

• Please note that ball bearings for track units are not included.

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344586974

2876:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Astute 2022 (TD2)

Tamiya is proud to announce a new 1/10 R/C off-road buggy model based upon the brand new TD2 chassis. The newly designed stylish body is produced by Kota Nezu who penned that of the recently released Super Avante.


About the model
• This is a 1/10 R/C assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm.
• The distinctive polycarbonate body is designed by Japanese designer Kota Nezu of znug design.
• The new TD2 chassis based around the TD4 chassis employs an front inboard suspension layout which offers exceptionally slim, low-profile form. Also, its front suspension arms have a skid angle of 25 degrees for superlative ground-hugging and stable performance off-road, plus angled CVA oil dampers to allow smooth suspension movement.
• The chassis based on the one-piece monocoque frame uses the same ball differentials as the ones of the TD4 chassis, plus full ball bearings, and features a transverse battery pack positioned to the rear and a midship transverse motor with 3 gears connecting it to the drivetrain for optimum balance and improved performance.
• Ribbed front and rear square spike tires facilitate stability and great grip. The newly designed star dish design front wheels are attached by hex hubs.
• The 4-wheel double wishbone suspension system uses CVA oil dampers for superlative performance.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure who gives your buggy a realistic look, and high-torque servo saver.

Bild

Artikelnummer: 4950344066100

2454:-

Tillfälligt slut (Obekräftad leveranstid)

 

Bild

Artikelnummer: 4950344065455

1183:-

Tillfälligt slut (Obekräftad leveranstid)

1/12 R/C Lunch Box Black Edition (CW-01) / NO ESC

Back, and in Black
The popular Lunchbox model from Tamiya's catalog makes a comeback in stylish black. This R/C assembly kit features the trademark boxy minivan body with metal-plated fenders, front grille and dampers, and includes a sticker set to add the finishing touches. All this is raised up over monster truck wheels cased in 115mm tires for a cool number that you can take for a spin any time, anywhere.

2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, front swingarm independent and rear rolling rigid suspension. Big 115mm diameter semi-pneumatic tires on black wheels offer dynamic running on even the toughest of surfaces. The sealed gearbox protects diff gear from dirt and sand during off-road driving and a rear mounted wheelie bar enables wild wheels in the air stunt driving

 

Specifications

Length: 385mm, Width: 290mm, Height: 225mm Weight: 1,560g (not including R/C mechanism and battery) Wheelbase: 207mm Tread: 212mm (Front), 216mm (Rear) F/R Tire Width/Diameter: 71/115mm ABS Box Type Frame Rear-wheel 2WD Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) F/R Friction Dampers 3-Bevel Differentials Gear Ratio: 14.7:1 Type 540 Motor Requires an Electronic Speed Controller (sold separately)

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344066339

1725:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Thunder Shot (2022)

Following the Fire Dragon, Scorcher and Thunder Dragon, Tamiya welcomes Thunder Shot as a re-released and updated version!

This R/C model features the some inherited basic specifications from Item 58361 with different CVA oil dampers and the addition of an aluminum motor mount.


About the Model
• This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987. Length: 390mm, width: 240mm, height: 135mm.
• Polycarbonate body is pre-cut & pre-painted in white and blue, with transparent canopy. (Body requires application of stickers, assembly and painting of figure, and other work.)
• The tough ABS bathtub chassis is easy for maintenance.
• 4-wheel independent double wishbone suspension with CVA oil dampers (*) uses front stabilizer for a superior ride. *Changed from CVA oil dampers I to II for ease of assembly.
• The front and rear sealed gearboxes contain compact, durable die-cast 3-bevel differential gears for smooth performance.
• Semi-pneumatic spike tires give great grip.
• Contains separate rear wing (pre-painted in white).
• Includes a driver figure.
• Includes Tamiya Type 540 Motor.

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344065141

1211:-

Tillfälligt slut (Obekräftad leveranstid)

1/12 R/C Midnight Pumpkin "Black Edition"

A Timeless Classic
This R/C assembly kit features a highly detailed pick-up truck body that is reminiscent of the classic 1950s American designs. Decked out in black accentuated by the metal plated front grille, overhanging fenders, dampers and roll bar, it cuts a sharp figure on top of big 115mm diameter tires.

2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, front swingarm independent and rear rolling rigid suspension. Big 115mm diameter semi-pneumatic tires on yellow wheels offer dynamic running on even the toughest of surfaces. The sealed gearbox protects diff gear from dirt and sand during off-road driving and a rear mounted wheelie bar enables wild wheels in the air stunt driving.

Specifications

Length: 385mm, Width: 290mm, Height: 260mm Weight: 1,560g (not including R/C mechanism and battery) Wheelbase: 207mm Tread: 212mm (Front), 216mm (Rear) F/R Tire Width/Diameter: 115/71mm ABS Box Type Frame Rear-wheel 2WD Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) F/R Friction Dampers 2-Piece Steering Tie-Rod 3-Bevel Differentials Gear Ratio: 14.7:1 Type 540 Motor

 

 Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344065134

1609:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C The Frog

Return of the Frog!
First introduced in 1983, the 2WD racing buggy Frog made a huge splash with its eye-catching design and high performance running.

The Frog now makes a comeback, updated for a new age, but with its basic structure essentially unchanged. Preserving its characteristic space frame, the oil dampers for trailing-arm type rear suspension have been updated to diaphragm type. Rear drive shaft features dogbone type joint for secure power transmission. Sleek polycarbonate body remains the same, while 3-piece wheels feature front grooved and rear spike tires for excellent off-road running.

 

2WD Chassis Packed with Innovation
Electric R/C racing buggy features ABS space frame and nylon suspension and bumper for a lightweight yet rugged form that is perfect for off road running. Battery is held in ultra-low position, giving this car the stability and weight balance to handle rough terrain and wild jumps. Advanced 4-wheel independent suspension composed of front double wishbone type featuring in-board spring and durable steel radius arm.

Rear trailing arm type features horizontally mounted aluminum cylinder oil dampers for effective shock absorbtion. Sealed differential gearbox ensures high speed cornering, while full ball bearings and 3-step gear ratio secures maximum transmission efficiency.

 

Specifications

Overall length: 410mm, Width: 240mm, Height: 145mm, Wheelbase: 1,020mm  Transmission type: rear 2WD  Suspension: Front double wishbone. Rear trailing arm  Tire width/diameter: Front 21/73mm. Rear 51/88mm  RS-540 Type motor included

 Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344066155

2496:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C 1990 Land Rover Defender 90 (CC-02)

Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase.


About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 429mm, width: 200mm, height: 215mm, wheelbase (short): 242mm (the same size as the CC-01S chassis).
• The unmistakeable Defender 90 form is accurately captured by the lightweight polycarbonate body, now with additional body mount attachment positions.
• Compatible with 5mm-diameter LEDs x2 for headlights and 5mm-diameter LEDs x6 for the rear.
• Includes separately molded parts for grille, side mirrors, light cases and outer roll gages.
• Black ABS resin wheels are paired with semi-pneumatic all-terrain tires.
• The short propeller shafts (P parts) transmit power to the differential gears front and rear.
• The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is great for off-road surfaces including rocky terrain.
• A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis.
• Tamiya Typr 540 motor are included.


• Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344065806

1353:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Volkswagen Beetle Rally (MF-01X)

This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car.

The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles.

What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt.

About the Model:

This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. The model uses the 239mm L wheelbase. The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. A host of Hop-Up Option parts are available to tune the MF-01X chassis.
 

Bild

Artikelnummer: 4950344065769

930:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C The Grasshopper II (2017)

Hop II It!
This re-release version of The Grasshopper II R/C off-road car assembly kit features a number of updates while keeping largely to the design of the original released in 1988. It includes a highly realistic injection molded polystyrene resin body, marking stickers and a driver figure.

The chassis' streamlined construction and use of a Type 380 motor makes the kit perfect for less experienced users. It is compatible with separately sold race spec Hop-Up Option parts such as Type 540 motors and CVA oil dampers.

A Durable Off-Road Chassis
A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.

Specifications:

Length: 400mm, Width: 223mm, Height: 136mm. Weight: 760g (excluding R/C equipment) Wheelbase: 253mm Tread (Front & Rear): 186mm Tire Width/Diameter: 19mm/74mm (Front), 36mm/82mm (Rear) ABS Bathtub Type Frame Rear-Wheel Drive 3-Bevel Differential 2-Piece Steering Tie-Rod Suspension: Front Swing Axle, Rear Rolling Rigid Gear Ratio = 14.7:1 Type 380 Motor

 

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344066278

1795:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Blackfoot (2016)

Back and Ramblin'!
This re-release version of the Blackfoot assembly kit features a chassis with a number of updates while keeping largely to that used on the original off-road car released in 1986. It includes a highly realistic ABS body with roll bar and metal plated front grille parts. The kit also comes with colorful marking stickers and a driver figure.

Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable red ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups. Superlative cushioning and grip are provided by 123mm-diameter, 60mm-width lug pattern tires on yellow wheels. Efficient and durable universal shafts come with rubber boots. A sturdy sealed gearbox protects the differential inside from dust and dirt.

Specifications:

Length: 440mm Width: 290mm Height: 270mm Wheelbase: 247mm Tread: 200mm (Front); 225mm (Rear) Tire Width/Diameter: 60mm/123mm ABS Resin Space Frame Rear-Wheel Drive 3-Bevel Differential Gear 2-Piece Steering Tie-Rod Suspension: Double Wishbone (Front); Trailing Arm (Rear) Oil Dampers Gear Ratio = 14.7:1 Type 540 Motor

 

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344065684

1140:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Plasma Edge II (TT-02B)

Get an Edge on the Competition
This exciting shaft-driven 4WD R/C buggy assembly kit creates the Plasma Edge II, and includes stylish polycarbonate body and rear wing parts. Marking stickers add to the racy mood of the model, as do fluorescent yellow star dish wheels and white CVA oil shocks.

The TT-02B is a dedicated off-road buggy chassis that offers hassle-free assembly and maintenance, as well as superb controllability.

Shaft-Driven 4WD and Superior Handling from the TT-02B
The shaft-driven 4WD TT-02B buggy chassis employs a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus white CVA oil shock units, giving the car assured handling, while left/right suspension arms and uprights are identical to facilitate hassle-free assembly. Front/rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside.

The top can be removed simply by loosening a few screws, making maintenance a breeze. Four different gear ratios can be applied with the use of three separately-sold types of pinion gear, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.

Specifications:

Length: 370mm, Width: 250mm, Height: 160mm Wheelbase: 266mm Tread: 217mm (Front), 208mm (Rear) Bathtub-type Chassis Frame Shaft-Driven 4WD Front/Rear 4-Bevel Differentials 3-Piece Steering Tie-Rod 4-Wheel Double Wishbone Suspension Tire Width/Diameter: 32/82mm (Front), 41/82mm (Rear) (Square Spike Tires) CVA Oil Shock Units Gear Ratio=10.71:1 (with kit-included pinion gear) Type 540 Motor

 

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344066261

1866:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Monster Beetle (2015)

Look Who's Back!
This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic customized Beetle body depicted in tough polystyrene resin, with metal-plated parts supplied in the kit to add the finishing touch for handles and headlight frames. A resin driver figure is the icing on top of the cake!

Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups. Superlative cushioning and grip are provided by 130mm-diameter, 58mm-width lug pattern pin spike tires on flashy gold color plated wheels. Efficient and durable universal shafts come with rubber boots

 

Specifications:

Length: 410mm Width: 285mm Height: 240mm Wheelbase: 247mm Tread: 220mm (Front); 225mm (Rear) Tire Width/Diameter: 58mm/130mm ABS Resin Space Frame Rear-Wheel Drive 3-Bevel Differential Gear 2-Piece Steering Tie-Rod Suspension: Double Wishbone (Front); Trailing Arm (Rear) Oil Dampers Gear Ratio = 14.7:1 Type 540 Motor

 

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344066230

3271:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Sand Scorcher (2010)

He's Back After 30 Years!
Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original.

This model realistically reproduces the unique form of the buggy which was seen at the one-make race at "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you.

Original Basic Layout
Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers.

Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance.

Specifications:

Length: 400mm, Width: 230mm, Height: 180mm Wheelbase: 250mm Tread: F170mm, R175mm Tire Width/Diameter: F21/73mm, R41/82mm Chassis: 2mm Thick FRP Plate with Reinforcing Aluminum Plate Rear Wheel Drive Chassis Weight: Approx.1730g Type 540 Motor included (Compatible with kit-included motor or Item 53689 540J Motor only) No Differential Gears Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle 4 Oil Dampers Gear Ratio=6.5:1 or 9.3:1

 

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344065301

1068:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C The Hornet

The Legend Lives On
The revolutionary 1984 2WD off-road buggy is back and more fun than ever before! The Hornet stands as one of Tamiya's most popular R/C cars ever released, helping launch a 2WD R/C buggy boom worldwide. Featuring excellent performance on both dirt and on-road tracks, this awesome buggy can take on any type of terrain. Just like the original, this re-release features an easy to assemble chassis and drivetrain consisting of a durable but lightweight ABS resin bathtub frame, diff gear loaded sealed gearbox, oil filled rear dampers, powerful RS 540 motor and high performance suspension system. The Hornet is perfect for those that used to have one, those that have always wanted one, and for those that want a revolutionary buggy that has earned its place in R/C history.

Specifications:

Length: 400mm, width: 230mm, height: 150mm. Weight: 874g Solid bathtub frame with side bumpers High performance Type 540 motor Independent swing axle front suspension with friction dampers Rolling rigid axle rear suspension with oil filled dampers Sealed rear gearbox to protect diff gear during off-road running Original 3-piece assembly wheels compatible with optional ball bearings (sold separately) Straight ribbed racing front tires Spiked buggy rear tires Durable, shock absorbent polycarbonate body shell Reinforced resin bumper

 

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344065240

1684:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Thunder Dragon (2021)

Tamiya is delighted to announce this re-issued and updated version of the 1988 hit buggy Thunder Dragon. With shaft-driven 4WD and smooth, ground hugging suspension providing a super drive, plus the stylish Thunder Dragon body which appeared in a classic R/C comic in Japan, this will be an exciting release for R/C fans of all ages and abilities.


About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 240mm, height: 130mm. Wheelbase: 260mm.
• The chassis is based around an ABS plastic bathtub frame for excellent durability and ease of maintenance.
• 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride.
• Features shaft-driven 4WD with front and rear die-cast 3-bevel differentials for smooth, superior handling feel.
• Semi-pneumatic spike tires give great grip, and are paired with large-diameter ABS wheels.
• The streamlined Thunder Dragon body is molded in polycarbonate, with non-canopy sections pre-painted in silver. It is pre-cut for convenience.
• Tamiya Type 540 motor are included.

• Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

Bild

Artikelnummer: 4950344065233

1684:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Fire Dragon (2020)

This is an updated re-release version of the 4WD buggy Fire Dragon, the original of which was first released in 1989. Both fans of yesteryear and modern day R/C aficionados will love the cultured drive and the classically styled body.


About the Model
• Length: 390mm, width: 240mm, height: 139mm.
• The chassis consists of a tough bathtub frame plus front and rear gearboxes with suspension attached.
• 4-wheel double wishbone suspension uses CVA oil dampers for a superior ride, and a front stabilizer for a firm setup.
• A new aluminum motor mount gives improved rigidity.
• Front and rear sealed differentials are die-cast 3-bevel types for superior handling feel.
• Use adjusters in the 3-piece steering tie-rod setup to alter toe.
• Body is molded in polycarbonate and pre-painted red. Just apply stickers to complete it.
• Tamiya Type-540 motor are included.

• Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Bild

Artikelnummer: 4950344066124

2400:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Wild One Off-Roader Blockhead Motors

Tamiya is delighted to announce a special re-release of the R/C Wild One with a twist! This model is the 2WD buggy based on Item 58525 released in 2012, and the sticker is designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS'' which has produced stickers and apparel, and customizations of Tamiya off road buggy models from the 1980s, also taking part in the design of collaborative fashion, music, and skateboard projects to expand the horizons of R/C cars.

About the model
• This is a 1/10 scale R/C assembly kit. Length: 425mm, height: 140mm, width: 225mm. Wheelbase: 255mm.


• Polycarbonate body (0.7mm thickness) is pre-cut and pre-painted in light blue(. *)
• Comes with metal-plated parts (A, E, G and front/rear wheels).(*)
• Window nets, number plates and dummy antenna are also included.(*)
• Includes new stickers designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS”.(*)

*These features are different from Item 58525.


• Durable and lightweight ABS box type frame is matched with a battery case which is compatible with modern power sources such as Tamiya Racing Packs and LF batteries.
• 4-wheel independent suspension consists of coil springs and trailing arms. A wide tread ensures excellent off-road stability.
• Enclosed gearbox includes differential gears for smooth cornering.
• Driveshafts feature dogbone-type joints and dust covers.
• Tamiya Type-540 motor are included.
• No ESC are included.

Bild

Artikelnummer: 4950344586967

3274:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Super Avante (TD4)

Tamiya is delighted to announce a brand new 1/10 R/C 4WD off-road buggy model. It employs the newly designed TD4 chassis and a stylish body produced by Kota Nezu, who has contributed to a number of popular Tamiya products.


About the model
• This is a 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.
• The eye-catching polycarbonate body (inspired by Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of znug design.
• Newly designed shaft-driven 4WD chassis based on the one-piece monocoque frame features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
• The TD4 chassis also employs an front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
• The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance.
• Features full ball bearings.
• Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
• Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
• Star dish wheels are paired with square spike tires which offer superlative grip off-road.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure for extra realism, and high-torque servo saver.
• NO ESC are included - Electronic Speed Controller (ESC) is sold separately.

 

 

Bild

Artikelnummer: 4950344467044

1931:-

Skickas av oss inom 8 - 12 vardagar.

1/10 X-SA Grasshopper

The next addition to the X-SA series of models is another classic Tamiya name: the Grasshopper.

This is a finished model of the Grasshopper (2005) (Item 58346); all you require to get going with this adaptable, lightweight and beginner-friendly 2WD buggy is your own transmitter, receiver, servo and a power source!

Benefits of X-SA series models
• No need to buy sprays and find a safe place to paint your model in – it’s already been painted by our experts!
• No need to put the time aside for an assembly process, with this finished chassis.
• No worry about mis-attached or mixed up parts!
• Use your own R/C equipment – no duplication of transmitters and receivers from multiple finished models.
• The series kicks off with classic names – don’t miss this chance to get ready-for-radio Tamiya legends!
• A stylish dedicated package will really catch the eye.
• Assembly instruction manual is included for use in maintenance of the model.
• Backup from the extensive range of Tamiya Spare and Hop-Up Option parts.

About the Model
• This is a 1/10 scale finished R/C model. Length: 389mm, width: 223mm, height: 135mm.
• Features a realistic and durable styrene body, which comes with the classic Grasshopper (2005) markings already applied.
• The model utilizes a simple yet tough 2WD chassis that can absorb plenty of rough terrain.
• The sealed gearbox contains a differential for smooth driving and cornering, enhanced by paddle tread rear and grooved front tires on three-piece assembly type wheels.
• Capable suspension uses independent swing axle front and rigid axle rear setups, cushioned by coil-sprung dampers.
• Comes with the TEU-105BK ESC and Tamiya Type 380 Motor.


• Requires separately sold R/C equipment, battery pack and charger.

Bild

Artikelnummer: 4950344474653

3121:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Mercedes-Benz Unimog 406 Series U900 (Blue-Gray Painted Body) (CC-02)

We are delighted to announce this limited edition version of the Mercedes-Benz Unimog 406 Series U900 (Item 58692) with pre-painted, pre-cut body/wheel arches, great for not only veterans but also beginners.


About the model
• This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm.
• The new polycarbonate body is pre-painted in PS-32 Corsa Gray (lower body sections in black), pre-cut body/wheel arches for minimal hassle.
• The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability.
• Includes block pattern tires paired with red ABS wheels.
• Propeller shafts (short: 76mm) are also included.
• A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear.
• Tamiya TBLE-04S and Tamiya Tye 540 motor are included.
• LED lights are included.

 

Bild

Artikelnummer: 4950344586929

2913:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Mercedes-Benz Unimog 406 Series U900 (CC-02)

The multi-purpose Mercedes-Benz Unimog is a truck with unrivalled off-road performance and its name is an acronym which stands for the German description "Universal-Motor-Gerät." The 406, which also has the ability to equip any of approximately 3,000 attachments for every imaginable task, now is depicted on the proven Tamiya CC-02 chassis.


About the Model
• This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm.
• The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem.
• Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs.
• Propeller shafts (short: 76mm) are also included.
• The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability.
• A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear.
• Tamiya ESC TBLE-04S and Tamiya Type 540 motor are included.

Bild

Artikelnummer: 4950344586851

2229:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C Comical Hotshot (GF-01CB)

Wonder Shot!
This assembly kit creates the Comical Hotshot, an exciting off-road buggy inspired by that Tamiya legend the Hotshot.

It comes with a stylish polycarbonate body pre-painted in red and with body mount holes already made; depictions of megaphone rear exhausts add a nice touch. The front bumper has space for the installation of four separately-sold LEDs.

The GF-01CB chassis employs highly capable gear-driven 4WD and is paired with ST block bubble tires - take it for a spin on- or off-road and you'll have a whale of a time!

GF-01: Seriously Stable 4WD
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor.

Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and a range of Hop-Up Option parts are available to hop-up your model.

Here comes another release in the popular series of Comical Buggy models of comical-ized classics – the Comical Hotshot!  The original Hotshot was our first shaft-driven 4WD buggy back in 1985.

Now, it is re-imagined as the Comical Hotshot, on the 4WD GF-01CB chassis.

About the Model
• This is a 1/10 scale R/C model assembly kit.
• Includes a lightweight and durable stylized polycarbonate version of the Hotshot body and wing, developed specially for this model. The body is pre-painted in PS-2 Red to save the hassle of a paint job. Stickers based upon the 2007 re-issue Hotshot (Item 58391) are included for decoration.
• Stylish bumper and muffler parts are included, as well as dedicated side guard components.
• Separately sold 5mm LEDs can be used to light up the model. Light pods are included.
• ST block bubble tires have stepped block patterns (width/diameter: front 45/99mm, rear 55/99mm).
• The GF-01CB chassis offers efficient gear-driven 4-wheel drive.
• ABS two-part wheels have red and white spoke parts.
• CVA Super Mini oil dampers molded in red ensure your ride has superior cushioning.
• A rear wheelie bar lets you perform thrilling wheelies by slamming on the throttle.
• Tamiya ESC TBLE-04S and Tamiya Type 540 motor are included.

 

Bild

Artikelnummer: 4950344474714

1281:-

Skickas av oss inom 8 - 12 vardagar.

1/10 R/C The Grasshopper II Black Special

Tamiya is delighted to announce a color variation version of a re-release classic - The Grasshopper II. This R/C off-road car assembly kit is based on Item 58643 released in 2017, which endowed the original with a number of updates.

The model features a fresh color variation, and includes CVA oil dampers.


About the Model
• This is a 1/10 scale R/C 2WD buggy model assembly kit. Length: 400mm, width: 223mm, height: 136mm.
• The durable black injection molded polystyrene body just requires application of stickers for easy setup, and has a driver figure (not painted) for attachment.
• The durable ABS chassis uses front swing arm and rear rolling rigid suspension setups.
• Fully enclosed gearbox contains a differential gear to aid smooth cornering.
• Longitudinal battery is easily removable from the back of chassis.
• Wheels are molded in durable ABS plastic.
• Compatible with a range of Hop-Up Option parts.
• Tamiya ESC TBLE-04S and Tamiya Type 380 motor are included.

Bild

Artikelnummer: 4950344474585

1951:-

Tillfälligt slut (Obekräftad leveranstid)

1/10 R/C Thunder Dragon (2021)

Tamiya is delighted to announce this re-issued and updated version of the 1988 hit buggy Thunder Dragon. With shaft-driven 4WD and smooth, ground hugging suspension providing a super drive, plus the stylish Thunder Dragon body which appeared in a classic R/C comic in Japan, this will be an exciting release for R/C fans of all ages and abilities.


About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 240mm, height: 130mm. Wheelbase: 260mm.
• The chassis is based around an ABS plastic bathtub frame for excellent durability and ease of maintenance.
• 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride.
• Features shaft-driven 4WD with front and rear die-cast 3-bevel differentials for smooth, superior handling feel.
• Semi-pneumatic spike tires give great grip, and are paired with large-diameter ABS wheels.
• The streamlined Thunder Dragon body is molded in polycarbonate, with non-canopy sections pre-painted in silver. It is pre-cut for convenience.
• Tamiya ESC TBLE-04S and Tamiya Type 540 motor are included.

 

Tom kundvagn

Summa totalt:

0 kr